My bike has no mounting holes.

You need Flex-Mount, a 4 mm hex key, a flathead screwdriver, and pliers or a knife.

1. 01

   Attach the brackets.

   Put the metal nuts in the bracket slots. Screw the brackets loosely onto the lock. Leave room to adjust.

   Enlarge ↗
2. 02

   Bend the strips.

   Gently bend the plastic strips around the frame.

   Enlarge ↗
3. 03

   Wrap around the frame.

   Wrap the strips around the frame. Fit the plastic screws and tighten them lightly with a flathead screwdriver.

   Enlarge ↗
4. 04

   Align and tighten.

   Centre the lock and leave room above the tyre. Tighten the screws that hold the lock, then the screws on the strips.

   Enlarge ↗
5. 05

   Trim the strips.

   Trim the excess with pliers or a knife. Check that the lock is secure.

   Enlarge ↗